Wiring Kit for Stebel Nautilus Compact Motorcycle Air Horn | 
 enlarge | Brand: AMANET
Category: Automotive Parts And Accessories
Buy New: $9.95
Rating:  6 reviews
Shipping Weight (lbs): 0.7
Dimensions (in): 0 x 0 x 0
MPN: SNWK
UPC: 700313950190
EAN: 0700313950190
Availability: Usually ships in 1-2 business days
| |
| Features:
| • | Includes all wiring components needed to install a Stebel Nautilus Compact Motorcycle Air Horn |
|
| Similar Items:
|
| Editorial Reviews:
Product Description
BikerHiway wants you to stay safe, so we've made it easy for you. This kit contains all the wiring components you'll need to install the horn and easy-to-follow instructions. The Wiring Kit for Stebel Nautilus Compact Motorcycle Air Horn contains: - 3 Feet of Red Primary Wire, 14 Ga. - 2 Feet of Black Primary Wire, 14 Ga. - 6 Feet (2 pcs. x 3') of White Primary Wire, 18 Ga. - 2 Bullet Connectors 18 Ga. 0.156 (5/32") Red (Pink) Male - 2 Bullet Connectors 18 Ga. 0.156 (5/32") Red (Pink) Female - 2 Insulated Push-on Blade Terminals, 18 Ga. .250 Red (Pink) - 4 Insulated Push-on Blade Terminals, 14 Ga. .250 Blue (Turquoise) - 1 Spade Terminal, with Brass Sleeve, 14 Ga., (#10) Blue (Turquoise) - 1 Ring Terminal, with Brass Sleeve, 14 Ga., (3/8") Blue (Turquoise) - 1 ea. Heavy Duty Inline Fuse Holder, 20 Amp 3AG Fuse (Included) - Wiring Instructions
|
| Customer Reviews: Read 1 more reviews...
 Wiring kit for Stebel Air Horn November 10, 2008
M. Elaine Morris (Dacula, GA United States)
Pretty good. Wire could be a little thicker guage, but all in all... pretty good.
 All the right stuff August 27, 2008
Viper__40 (Expat, South Korea)
Of course I could not say enough about my Stebel horn, so it's the same for the wiring kit. All the right connectors make a job easier. Especially here in Korea where you can find little or nothing you're used to for projects. I had to go all over town just to find the length of wire I needed capable of carrying 20 amps for the Hyosung Rally Scooter.
 Helpful, but included wires are too short August 1, 2008
Brett W. Coon (San Jose, CA)
1 out of 1 found this review helpful
The kit provided a reasonable start for me, but the included wires were too short, so I still ended up having to go buy more wire and connectors. You're mostly paying for the convenience of having the connectors picked out for you. If I were doing it again, I don't think I'd get the wiring kit.
mega time saver July 1, 2008
Bruce Byrne (Oriental NC)
I installed this harness on an 07 RoadKing and it only took me an hour and a half most of that time was figuring how I wanted the harness to run as to hide it.Thank you Stebel
Kit is very useful. May 13, 2008
Kurt Bertholf (dragunlord.com)
I bought the chrome Nautilus horn for my motorcycle and this kit at the same time. This kit was great for installing the horn. I have a 1980 Kawasaki KZ250. This kit will work great for any motorcycle with a basic wiring system. I wouldn't think that a motorcycle would have a complex wiring system, so this would probably be good for all bikes. All you need to have on the bike is 2 wires going to the horn, knowing the positive and negative. Then access to the positive lead on the battery, a place to put a ground wire to the frame near where you mount the horn and a place to mount the relay. The relay is small so finding a place to mount it shouldn't be a problem.
The kit comes with all the wires you should need to install the horn. The only problem you might run into is the power lead from the relay to the horn, but you can either splice the wire, or run another longer wire.I was just able to get the wire to reach on my bike.
It did not take that long at all to install the horn on my bike. I was pleasantly surprised. I thought that it would take longer than it did, so I was able to take my time installing it nicely.
I would strongly suggest buying this kit for anyone installing the Stebel horn onto their motorcycle.
|
|
|
